Microsoft Ads

Microsoft Ads Performance Max: setup, controls and new reports

Microsoft Ads Performance Max for Canadian advertisers: setup requirements, budgets, the new controls and reports, and what to check before you launch.

Microsoft Ads Performance Max: setup, controls and new reports

Key takeaways

  • Microsoft Ads Performance Max runs one asset-based campaign across Microsoft’s network, including Bing, MSN, Outlook, Edge and Copilot placements. Microsoft says it’s available in all its advertising markets.
  • You need a UET tag (or offline conversion uploads), a daily budget and conversion goals. Without a conversion goal, bidding falls back to Maximize clicks.
  • Microsoft added real controls in 2026: age and gender targeting, device targeting, search term and auction insights reports, and landing page reporting rolling out from mid-November.
  • Plan for a two-to-four-week learning period and hold targets steady for two weeks after each change.

Microsoft Ads Performance Max is worth a fresh look if you dismissed it as a black box. Through 2026, Microsoft added targeting controls and reports that many advertisers asked for, and it’s easy to import a Google PMax campaign to get started. This article covers what the campaign type does, what you need before launch, the controls now available, and a launch checklist for Canadian accounts.

What is Performance Max in Microsoft Ads?

Performance Max in Microsoft Ads is an asset-based campaign type that uses AI to serve search, audience and Product ads across the whole Microsoft Advertising Network from one campaign. You supply headlines, descriptions, images, logos and audience signals; Microsoft decides where and when to show them based on your conversion goals.

Microsoft lists placements such as Bing, AOL, Yahoo, MSN, Edge and Outlook, and its solutions page says PMax runs across Microsoft properties including Copilot. Search campaigns with exact match keywords take priority over PMax when both could serve, which helps protect tightly managed keyword campaigns.

PMax became globally available in March 2024, and Microsoft’s documentation says it’s available in all Microsoft Advertising markets. If you’re deciding whether Microsoft belongs in your Canadian plan at all, start with Microsoft Ads in Canada: is it worth adding to your plan?

What do you need before launching Microsoft PMax?

Before launch you need a UET tag with conversion goals (or offline conversion uploads), a daily budget (shared budgets aren’t supported) and enough assets to fill an asset group. Microsoft supports Maximize conversions, with optional Target CPA, and Maximize conversion value, with optional Target ROAS.

Microsoft’s documented requirements and limits:

Item Requirement or limit
Tracking UET tag required, unless you use an offline conversion goal and upload offline conversions
Budget Daily budget; shared budgets not supported
Bidding Maximize conversions (optional Target CPA) or Maximize conversion value (optional Target ROAS). Without a conversion goal, bidding switches to Maximize clicks
Headlines Up to 15 short headlines (30 characters) and 5 long headlines (90 characters)
Descriptions Up to 5 (90 characters)
Images Up to 20; at least one 1.91:1 image (1200 x 628 recommended)
Logos Up to 5, minimum 128 x 128
Search themes Up to 50, 80 characters each
Video Not currently supported in PMax
Scale Up to 300 PMax campaigns per account and 100 asset groups per campaign

Note the video gap. If you import a Google PMax campaign that relies on video, your Microsoft version will run without it, so check that your image assets can carry the creative on their own.

For Canadian accounts, make sure your UET setup respects consent. Our guide to conversion tracking in Canada covers consent, CASL and server-side options. Microsoft’s Conversions API, now generally available, sends conversions server to server from your site, app, CRM or point-of-sale system, which can help when browser tracking is limited.

How do you import PMax from Google Ads?

Use Microsoft’s Google import to bring over existing Performance Max campaigns, including those with new customer acquisition goals, which Microsoft says has rolled out to all advertisers. Then review budgets, assets, conversion goals and exclusions in Microsoft before you turn the campaigns on.

The import saves time, but it doesn’t make the two platforms identical. Rebuild your conversion goals around UET, confirm budgets in CAD, and check which settings didn’t carry over. Our Google Ads to Microsoft Ads import checklist walks through each step.

Which PMax controls does Microsoft offer now?

As of November 2026, Microsoft PMax offers age and gender targeting (generally available), device targeting (rolling out to all advertisers), audience exclusions and messaging guidelines (open pilots), account-level negative keyword lists, account-level website exclusions and brand exclusions that Microsoft is refining to apply to text ads only.

Control Status per Microsoft Use it to
Age and gender targeting Generally available Include or exclude age groups and genders
Device targeting Rolling out to all advertisers Include or exclude device types
Audience exclusions Open pilot (ask your account team or Support) Keep existing customers or low-value audiences out
Brand exclusions Being refined to allow text-ads-only exclusion Stop text ads on brand queries while product ads still show
Messaging guidelines Open pilot (PMax and Search with AI Max) Give up to 40 guidelines on wording and tone for AI-generated copy
Negative keywords Account-level lists Block irrelevant queries
Website exclusions Account level only Block third-party sites (Microsoft’s own sites can’t be excluded)

Messaging guidelines matter for regulated or bilingual brands. If your legal team needs certain claims avoided, or you want a consistent tone in English and French copy, ask about the pilot. For the shared lists, our negative keyword lists for Canadian accounts are a good base. The Google equivalent of these controls is covered in Performance Max controls: how to steer what you can.

What reports can you see in Microsoft PMax?

Microsoft PMax now shows search term reporting, auction insights, landing page (Final URL) reporting and, rolling out from mid-November 2026, search term landing page reporting, which shows which landing page users reached for each search intent. Together they let you audit queries, competitors and pages instead of trusting the campaign blind.

A practical review rhythm:

  • Weekly: scan search terms for irrelevant queries and add them to your negative list.
  • Weekly: check which landing pages receive traffic and whether they convert.
  • Monthly: review auction insights to see which competitors you meet most and whether your share is moving.
  • After device targeting arrives: compare device performance before excluding anything. Thin data on one device type isn’t a reason to cut it.

How much budget and time does Microsoft PMax need?

Microsoft recommends a budget up to two to three times what your historical standalone campaigns spent, and a learning period of two to four weeks or two to three conversion cycles. Expect first impressions within three days for Product-ad campaigns and four days for others. Add Target ROAS only after 30 conversions in 30 days.

Microsoft’s other learning-period advice is worth following:

  • After changing a target, wait two weeks before changing it again.
  • Start with a less restrictive target and tighten later.
  • Don’t exclude placements because of low impressions, no clicks or a short observation window.

Illustrative example: if your Microsoft Search campaigns historically spent $40 CAD a day, Microsoft’s guidance points to a PMax budget of up to $80 to $120 a day. If that’s more than you can commit, start with a narrower asset group and a clear Target CPA instead of spreading a small budget thin. Our guide on how to calculate target CPA from your margins helps you set that number.

Microsoft PMax launch checklist

  1. Confirm UET is firing and conversion goals are set (or plan offline uploads).
  2. Decide whether to import from Google or build fresh.
  3. Write 15 short headlines, five long headlines and five descriptions; add at least one 1.91:1 image and a logo.
  4. Add up to 50 search themes that reflect real Canadian queries, including French terms if you serve Quebec.
  5. Attach your account-level negative keyword list and website exclusions.
  6. Set age, gender and device targeting only where you have a clear reason.
  7. Set the budget with Microsoft’s two-to-three-times guidance in mind.
  8. Leave it alone for two to four weeks, then review search terms, landing pages and auction insights.

Frequently asked questions

Is Performance Max available in Microsoft Ads in Canada?

Microsoft’s documentation says Performance Max is available in all Microsoft Advertising markets, and it has been globally available since March 2024. Microsoft doesn’t publish a separate Canadian announcement, so if you don’t see the campaign type in your account, contact Microsoft Advertising support.

Can I import Performance Max campaigns from Google Ads into Microsoft Ads?

Yes. Microsoft’s Google import supports Performance Max, including campaigns with new customer acquisition goals. Review the imported campaigns before enabling them: rebuild conversion goals on UET, check CAD budgets and note that Microsoft PMax doesn’t currently support video assets.

Does Microsoft Performance Max show search terms?

Yes. Microsoft says search term reporting is now available for Performance Max, along with auction insights and landing page reporting. Search term landing page reporting started rolling out in mid-November 2026. Use these reports weekly to add negatives and check landing pages.

How long is the learning period for Microsoft PMax?

Microsoft says to expect two to four weeks, or two to three conversion cycles. First impressions usually come within three days for Product-ad campaigns and four days for others. Avoid changing targets more than once every two weeks during and after learning.

Can you exclude brands or audiences in Microsoft Performance Max?

Brand exclusions exist, and Microsoft is refining them so you can apply them to text ads only while product ads still show on brand searches. Microsoft’s help page notes not every advertiser has brand exclusions yet. Audience exclusions are in open pilot; ask your account team or Support to join.

Sources: Microsoft Advertising: What’s new this October (2026); Microsoft Advertising: Performance Max updates, April 2026; Microsoft’s Performance Max now available globally (March 2024); Introducing Microsoft Advertising’s Performance Max (2023); Microsoft Advertising: Performance Max; Microsoft Learn: About Performance Max campaigns; Microsoft Learn: Create a Performance Max campaign; Microsoft Learn: Best practices for Performance Max; Microsoft Advertising API: Performance Max campaigns

Platform details as of November 2026.

Get the monthly ad cost brief

What clicks cost in Canada this month, what changed on Google, Meta and the rest, and one thing to try. Free, once a month.

One email a month. We never share your address.